EFFECT OF THE ESTER ON THE RESISTANCE OF ISOPARAFFIN OILS THICKENED WITH ESTER THICKENERS TO MECHANICAL DEGRADATION
Abstract
This article examines the effect of esters on the resistance to mechanical degradation of ester thickeners as viscosity modifiers in thickened isoparaffin oils. The main reason for triggering such engine oils is the destruction of the thickener. The introduction of the ester should increase the polymer's resistance to rupture when passing through mechanisms with small gaps – gear oil pumps, in the lubrication system of an internal combustion engine. Also, esters with long alkyl chains should increase the solubility of polar thickeners in low-polar base oils, which can expand the application ranges of such thickeners and increase the resistance of thickened oils to low temperature-to eliminate the precipitation of the thickener at low temperatures. Depending on the thickening capacity of the viscosity modifier, its application may allow the production of motor oils with an extended service life in the entire range of viscosities of commercial oils according to SAE J300.
References
2.Pasport kachestva VHVI-4 «TANEKO»
3.Oficialnyj sajt «Syntolux» [elektronnyj resurs] URL: https://syntolux.com/ (data obrasheniya 09.01.2021)
4.Oficialnyj sajt SIBUR [elektronnyj resurs] URL: https://www.sibur.ru/ (data obrasheniya 10.01.2021)
5.Evdokimov A. Yu., Fuks I. G., Shabalina T. N., Bagdasarov L. N. Smazochnye materialy i problemy ekologii. — M.: GUP Izdatelstvo «Neft i gaz» RGU nefti i gaza im. I. M. Gubkina, 2000. — 424 s.
6.Oficialnyj sajt SAE INTERNATIONAL [elektronnyj resurs] URL: https://www.sae.org/standards/content/j300_201501/ (data obrasheniya 11.01.2021)
7.Sajt predpriyatiya OOO "ULTRAZVUKOVAYa TEHNIKA" [elektronnyj resurs] URL: http://www.petsonic.ru/uzo-02-0103.shtml (data obrasheniya 11.01.2021)
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.